Products    Sizing Guidelines   FAQ    Documentation   About Us   Ergonomics Information   Home

MSM Height and Depth Table

Leg Position

Clamp Position

H

D

Y

X

Comments

 

 

 

 

 

 

All dimensions are in inches

L1

C1

3

7 3/4

0

4

 

L1

C2

3

9

0

3

 

L1

C3

3

9 3/4

-1/2

2

 

L2

C1

3 1/4

7 5/8

1/4

3 1/8

 

L2

C2

3 1/2

9

0

2 7/8

 

L2

C3

3 1/4

9 3/4

-1/2

2

 

L3

C1

3 3/4

7 1/2

1/2

3 3/4

 

L3

C2

3 3/4

8 1/2

1/4

3

 

L3

C3

3 3/4

9 3/4

-1/2

2

 

L4

C1

4 1/2

7

1

3 3/4

 

L4

C2

4 1/4

8 1/2

1/4

3

 

L4

C3

4 1/4

9 1/2

-1/2

2

 

L5

C1

5 1/4

7

1 1/2

3 1/2

 

L5

C2

4 3/4

8 1/4

1/2

3

 

L5

C3

4 1/2

9 1/4

-1/2

2

 

L6

C1

N/A

N/A

N/A

N/A

Cannot be used in this position

L6

C2

5 7/8

7 1/2

1 1/4

2 5/8

 

L6

C3

5 3/8

8 3/4

0

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Our Microscope rests include a clamp the fits from 5/8 to 1 3/4 inch work surfaces. If your work surface is over 1 1/4 inches thick, and you need to have these rests on a microscope requiring H over 3 1/2 inches, you will need our thick workstation adaptor kit, model number C44-TK. Please identify the model of MSM that you have for use to provide the proper materials in the kit. It is available upon request for $20.

Return to R&D Ergonomics Homepage

Return to Microscope Rests

For more information, contact:
R&D Ergonomics Inc., 6 Harvey Brook Drive, Freeport, ME 04032
TEL: (207) 865-6445  FAX (636)773-0951 Email: RDErgonomics@comcast.net